Download Samsung GALAXY S4 SGH-I337 USB Drivers Windows 7, 8, 10
You need the Samsung GALAXY S4 SGH-I337 Drivers USB if Samsung is developing on Windows, of course, want to connect your Android device Samsung for the development environment via USB.
Download and install Samsung Driver USB. Download the Odin tool and then extract it. Download the Firmware and extract it. Download Pit file I337 depending on the problem of the device you have in case there are no problems in flashing do not use the file. Open odin tool And from the BL box we choose the file BL=BL / AP=AP / CP=CP / CSC=CSC. 1337x brings you the latest games, movies, tv series, music and software absolutely for free. This is the official Android 4.2.2 Jellybean stock firmware/ROM(Flash file) for the Samsung Galaxy S4 (AT&T) SGH-I337. The flash file for the Samsung Galaxy S4 (AT&T) SGH-I337 is necessary when you want to perform any of the following software-related tasks: Upgrade/Update your Samsung Galaxy phone’s firmware. Reinstall the stock ROM that was officially installed. Unroot Continue Reading. Samsung SGH-I337 Firmware Download (Samsung Galaxy S4 SGH-I337 Flash file). Find details of firmware that have PDA code and CSC code. The operating system version is Android. You can recover your Samsung Galaxy S4 SGH-I337 firmware that you got Software Issue, Boot Issues, or Dead Issue, etc.
Now I wish to share with you how to set up Samsung drivers Offline Installer around the PC or Notebook, this way I share to a usually do not know just how to install the Samsung drivers also it also serves to address Mobile unreadable through computer or laptop. We refer to the direct manner how to Put in Samsung USB Drivers below :
Samsung GALAXY S4 SGH-I337 Download USB Driver
Download / sgh-i337 hang fix file full free firmware SW VERSION: I337UCUFNB1 4.4.2 ALLATTI337UCUFNB1I337ATTFNB1505595REV06userlowshipMULTICERT.tar.rar. Justice for mac.
Install and Setup Samsung USB Drivers For Windows
- Download Samsung GALAXY S4 SGH-I337 USB Drivers Document, and save it in an area where the Official is no problem to find again
- Locate the File, right Select on your Samsung Samsung Galaxy S4 SGH-I337 USB Drivers
- Select Extract Here because of the shapefile (zip)
- Wait for your processing system to extract completed.
- When you’re finished Select left double or press enter on your keyboard at the Samsung USB walkers
- completed on the infusion.
- After that official could vote yes or no, well merely select yes
- Then select next.
- Select the only English Language then select Next.
- Then you’ll place the Samsung GALAXY S4 SGH-I337 USB Driver shared with me, only let us know another place of storage in C/Program files.
- Now, Wait the Installation process is complete.
- Finished.
Samsung USB Drivers Download
| Name | Size | Download |
| SAMSUNG_USB_Driver_for_Mobile_Phones.zip | 15.3 MB |
Samsung I337 Firmware Download
- Windows 7 32bit or 64bit
- Windows 8 32bit or 64bit
- Windows 8.1 32bit or 64bit
- Windows 10 32bit or 64bit
- Windows XP 32bit or 64bi
- Windows Vista 32bit or 64bit
- Windows 2003 32bit or 64bit
- Windows 2008 32bit or 64bit
- Windows 2012 32bit or 64bit
- Windows 32bit or 64bit
Samsung GALAXY S4 SGH-I337 Manual PDF & User Guide Download
Samsung GALAXY S4 SGH-I337 Review
The next flavor is really for it’s our variation with the Qualcomm Snapdragon 600 chipset sporting its quad-core Krait-300 CPU and likewise an Adreno 320 GPU chipset. Both models supply a hefty gear shredder also. Even the Galaxy S4 Wooden shjips west tracklist. will certainly come with an LPDDR3 2 GB RAM, internal storage spaces of 16/32/64 GB, and also new sensing units that could detect humidity and humidity degree. Samsung is wanting to create the s 4 4G LTE qualified on the planet.
Samsung GALAXY S4 SGH-I337 Features
The Samsung Galaxy S4 SGH-I337 will additionally feature expandable storage to get a micro sd card supporting as much as 64 GB. The screen of this real monster may use the full Super HD AMOLED capacitive touchscreen that’s 4.99 in. Diagonally as well as heaps 441 PPI (pixels per inch). Its camera will have a 13 MP sensor at the rear which has got the ability to shoot 1080P videos along with a 2.0 MP 1080p front-facing electronic camera.
NOTE: UFI BOX latest version software started from 2018 onward download directly from the SHELL or Software
Xenon for mac. 28th Oct 2017
UFI Software v.1.2.0.419 Download Link
- Support changes:
- ADD: Over 5.4TB compressed files uploaded to the support servers
- ADD: Revised support files core system
- ADD: Revised built-in download manager with resume and queue support
- ADD: Download limitation on each users(10 GiB or 20 files a day)
- eMMC ToolBox changes:
- ADD: Verify for User Partition
- Used to verify data from the specific partition of eMMC againts data from file
- ADD: Sector 0 verify for NAND Test function
- BUGFIX: PIT file handling bug fixed on Factory image tab
- BUGFIX: Workaround for FFU causing eMMC dead to moviNAND with VHX0 controller(KMVTU)
- BUGFIX: Minor bugfixes and improvements
- Android ToolBox changes:
- ADD: Disable MI Cloud Services
- This function will patch firmware version 8.0 and below(on the fly) while flashing
- Works on both Qualcomm and MediaTek platform
- BUGFIX: UFI Box and UFI Dongle can now work simultaneously
- BUGFIX: Minor bugfixes and improvements
- [MediaTek tab]
- ADD: Meizu SLA Auth support
- Meizu Mediatek Devices will work just like other Mediatek Devices in general(requires internet connection)
- ADD: Automated [Coolpad] Exit Factory Mode on firehose flashing procedure
- [Qualcomm tab]
- ADD: Support for Official LGE TOT Firmware extraction
- ADD: Automated General CDT handling for Other Qualcomm devices(Lenovo) on firehose flashing procedure
- BUGFIX: Oppo Qualcomm OFP extraction bug fixed
- BUGFIX: Revised DA handling for MT6750,MT6755(Helio P10),MT6757(Helio P20),MT6795(Helio X10),MT6797(Helio X20)
- BUGFIX: Revised [Oppo] Exit Fastboot Mode, now it should work on any known firmware variants
30th July 2017
- eMMC ToolBox changes:
- ADD: Auto listing brand from 'Android ToolBox' firmware directory on Factory Image tab
- ADD: Custom Ext_CSD preset
- You can create your own ext_csd custom preset file, see example.txt in Drive:UFIemmcdefConfig
- BUGFIX: Minor bugfixes and improvements
- Android ToolBox changes:
- [MediaTek tab]
- ADD: Storage type selection
- ADD: Bypass security moved to Special Task
- [Qualcomm tab]
- ADD: UFS provisioning support for Qualcomm based devices
- New 'blank' UFS memory should be configured so the flashing procedure can be done.
- Provisioning task will configure new UFS chip according to device partitions layout.
- Provisioning UFS is a irrecoverable ONE time operation so make sure to select correct 'provisioning xml'
- ADD: 'Show All Partition' option
- ADD: Partial flashing support from userarea binary
- ADD: Full erase before flash option
- ADD: Firmware and partitions validation when loading rawprogram xml
- ADD: Automated [Oppo] Exit Fastboot Mode on firehose flashing procedure
- ADD: Support for Official Oppo firmware package (*.ofp)
- ADD: .tar.bz2 firmware handling to support official Oppo firmware package
- BUGFIX: [Oppo] Exit Fastboot Mode revised, now it should works on any known firmware variants
- BUGFIX: Official Oppo firmware package (*.ofp) for Qualcomm Devices
- BUGFIX: Fixed DA handling for MT6750,MT6755(Helio P10),MT6757(Helio P20),MT6795(Helio X10),MT6797(Helio X20)
- Vivo MT67xx Devices now supported
- BUGFIX: Minor bugfixes and improvements
UFI software latest setup:
UFI_v1.2.0.399_setup.zip (size: 93.6 MB)
Additional packages:
UFI_android-mediatek.db-pkg.7z (size: 99.3 MB)
UFI_emmc-isp-pictures-pkg.7z (size: 63.6 MB)
UFI_android-superuser-pkg.7z (size: 17 MB)
UFI-ASUS_intel_debrick_package.zip (size: 116 MB)
Manual & Tutorial:
- How To Activate Android ToolBox- How To Activate UFIBOX
I337 Firmware 5.0.1 Download
- Step-By-Step Installation
Sgh-i337 Stock Firmware Download
Downloadable Manual (size: 4.5 MB)